Cracking in the middle of corrugating medium during production can affect flute formation, board quality, and production efficiency. Several factors may contribute to this problem, including roll alignment, paper moisture, and web tension.
1. Incorrect Roll Alignment
Misalignment between the corrugating rolls and pressure roll may result in uneven pressure distribution across the working width.
If the pressure is excessive in the middle section, the corrugating medium may be compressed beyond its acceptable range, increasing the risk of cracking.
Checking roll parallelism and pressure distribution is therefore an important step when investigating this issue.
2. Low Paper Moisture
Paper with insufficient moisture tends to become less flexible and more brittle.
When the corrugating medium passes through the corrugating rolls, it may not withstand the forming pressure, resulting in cracks or breaks.
Checking paper moisture and conditioning conditions can help identify this potential cause.
3. Excessive Web Tension
Excessive tension during paper unwinding or feeding can place additional stress on the corrugating medium.
If the paper is already dry or weakened, high tension may increase the likelihood of cracking.
Check the tension settings and ensure they are suitable for the paper grade and production conditions.
Conclusion
When corrugating medium cracks in the middle, start by checking roll alignment and pressure distribution, followed by paper moisture and web tension.
Identifying the actual cause requires inspecting the paper path and machine conditions rather than adjusting a single parameter blindly.